Page 1 of 1
lost key/removing ignition
Posted: Mon Aug 22, 2005 11:30 am
by mikeg
I have an 86 Spree and I need to take the ignition assembly to a locksmith to have a new key made. I've taken a look at it and since I'm no good at soldering I'm not sure what to do. A Honda guy told me to follow the wires and there will be a plug...I looked before and didn't see one.
Is there an easy way to get the ignition off and back on the bike?
Thanks
Posted: Mon Aug 22, 2005 2:27 pm
by vette76
yes there should be a connector 6" behind the ignition. it might be in the loom. you can also take the seat lock off. its just 1 clip u pull off from behind the panel, and it slides out. might be easier.
Posted: Mon Aug 22, 2005 2:34 pm
by mikeg
thank you x 100000!!!!!
never thought of the seat lock!
mike
Posted: Mon Aug 22, 2005 2:42 pm
by vette76
lol. no problem
Posted: Mon Aug 22, 2005 11:36 pm
by mikeg
success!
i now have two keys. cost: $12 cdn.
i ended up disconnecting the ignition thing.
there is a code on there for having replacement keys made.
thanks again.
Posted: Thu Sep 01, 2005 3:42 pm
by Justinsane
mikeg wrote:success!
i now have two keys. cost: $12 cdn.
i ended up disconnecting the ignition thing.
there is a code on there for having replacement keys made.
thanks again.
did you need that ignition code for having the keys made? or did you just give them the seat lock and they made a key from it?