Page 1 of 1
I WANT MORE SPEED ON MY ELITE WITHOUT A BIG BORE KIT
Posted: Fri May 02, 2008 6:45 am
by justinnielsen01
i have a 94 honda elite i want more speed it goes 28 mph and i want it to go 35 or 40. can any one help me with this.
Posted: Fri May 02, 2008 9:09 am
by burnt_toast
Get gears at the minimum and you'll be set, get a low cc chamber pipe and you'll have even more fun

all with no bore kit
Posted: Fri May 02, 2008 9:47 am
by Dac
9:1 gears.
it will take a hair off your take off but your top speed will boost to what you want. (maybe even a hair more)
http://hondaspree.net/phpBB2/viewtopic.php?t=995
Here is a link with some free tips to speed up your bike.
http://www.VTCycles.com
Here is a link were you can buy your gears. Remember, stock cylinder cant go much lower then 9:1.
Posted: Fri May 02, 2008 2:37 pm
by RastaCalavera
Can this be done with an 87??? I have been wanting to get above 25 for a long time. Would changing the air filter to a cone give me anything as well??
Posted: Fri May 02, 2008 4:07 pm
by justinnielsen01
where are the gears and do they take a lot to change. and on vt cycle i couldnt find any thing. any where else i could buy them
Posted: Fri May 02, 2008 6:42 pm
by danmdevries
justinnielsen01 wrote:where are the gears and do they take a lot to change. and on vt cycle i couldnt find any thing. any where else i could buy them
call or email them.
Posted: Fri May 02, 2008 10:02 pm
by Dac
justinnielsen01 wrote:where are the gears and do they take a lot to change. and on vt cycle i couldnt find any thing. any where else i could buy them
vtcycles site is way out of date. Just call them up and talk to them.
http://www.hondaspree.net/phpBB2/viewtopic.php?t=4489
this is a page i made on how to change the gears.
took about an hour and a stander set of tools.
there is one step were you will need help. you can take it to a trans shop or similar and they will do it really cheap(some times free)