Page 1 of 1

86 Aero 50 Cant hit 40 mph

Posted: Mon Feb 25, 2008 4:04 pm
by Crazy_Fro
hey guys I have been lurking around these forums for a while and just joined, I have just acuired a hond Aero 50 so far i have adjusted the carb so it is running right, cleaned the filter. It runs alot better but i cant hit 40 mph only about 30 right now, i am going to pick up a new plug today and see if that helps. Any Ideas?!

~Thanks

Mo

Re: 86 Aero 50 Cant hit 40 mph

Posted: Mon Feb 25, 2008 4:47 pm
by CharlotteSpreeRider
Crazy_Fro wrote:i cant hit 40 mph only about 30 right now
It's only supposed to go 30 MPH. You have to do mods to make them go faster.

-aseigler

Posted: Mon Feb 25, 2008 5:07 pm
by Kenny_McCormic

Posted: Tue Feb 26, 2008 5:42 pm
by Crazy_Fro
Any recommended mods that will get me to at least 40 if not more with out having to get into the engine?!

Thanks :)

Posted: Tue Feb 26, 2008 7:47 pm
by MySpree
fully unrestricted it wont hit 40 easy, it will struggle to get there, this is no 85, you might not even be able to get 40 unrestricted, the fastest i have ever got a 86 going unrestricted was 37.

Posted: Tue Feb 26, 2008 9:13 pm
by Kenny_McCormic
Crazy_Fro wrote:Any recommended mods that will get me to at least 40 if not more with out having to get into the engine?!

Thanks :)
The engine makes it go therefore you must take apart the engine to make it go faster. Derestricting it isnt hard.

Posted: Wed Feb 27, 2008 1:39 am
by stillspeeding
change the belt and get an after market front pulley=45mph

Posted: Wed Feb 27, 2008 9:49 am
by chevyguyjay
when i got my 86 aero50 goin, i got a top speed of 36-37. has really good take off. all stock. :wink:

Posted: Fri Feb 29, 2008 12:57 pm
by snikro
stillspeeding wrote:change the belt and get an after market front pulley=45mph
But then doesn´t your low-end go to ****?