1997 versus 2000 Elite
Posted: Tue Feb 19, 2008 5:40 pm
Is the 1997 Elite the same scooter as the 2000 Elite ?
Thanks,
Happy
Thanks,
Happy
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://www.fastfoamfilter.com/hondaspree.net/phpBB3/
1997 versus 2000 Elite
http://www.fastfoamfilter.com/hondaspree.net/phpBB3/viewtopic.php?t=4728
Page 1 of 1
Posted: Tue Feb 19, 2008 5:56 pm
Im pretty sure 94-01 are all the same internally.
Posted: Tue Feb 19, 2008 6:41 pm
yes indeedy
Posted: Tue Feb 19, 2008 7:55 pm
...feed the needyburnt_toast wrote:yes indeedy
[i got a few friends that say it all the time. Dont ask...]
Posted: Tue Feb 19, 2008 10:20 pm
Thanks to all?? do all the transmission part interchange too?Kenny_McCormic wrote:Im pretty sure 94-01 are all the same internally.
Happy
Posted: Tue Feb 19, 2008 10:55 pm
all honda elites 50's...
94-01
are the same bike part for part. The only and only difference is the some bikes are restricted and some are not. All parts are interchangeable.
94-01
are the same bike part for part. The only and only difference is the some bikes are restricted and some are not. All parts are interchangeable.
Posted: Wed Feb 20, 2008 12:01 am
Dac wrote:all honda elites 50's...
94-01
are the same bike part for part. The only and only difference is the some bikes are restricted and some are not. All parts are interchangeable.
once again thanks all
Happy
Posted: Thu Feb 21, 2008 1:54 am
There was a washer eliminated in the final drive gear either in 97-98 everything else is the same.
Posted: Mon Feb 25, 2008 6:31 pm
someone told me the part of the frive is double bearing instead of 1 was 2 till 98 i guessstillspeeding wrote:There was a washer eliminated in the final drive gear either in 97-98 everything else is the same.
Posted: Tue Feb 26, 2008 2:18 am
I told you on the other forum...happyman wrote:someone told me the part of the frive is double bearing instead of 1 was 2 till 98 i guessstillspeeding wrote:There was a washer eliminated in the final drive gear either in 97-98 everything else is the same.
outer gear over only. 
87,88-93,94-98 2 bearing cover & 1 bearing on 99-01 only...Posted: Tue Feb 26, 2008 10:43 am
that was nice of you . now others also know it... its great!veedubh20 wrote:I told you on the other forum...happyman wrote:someone told me the part of the frive is double bearing instead of 1 was 2 till 98 i guessstillspeeding wrote:There was a washer eliminated in the final drive gear either in 97-98 everything else is the same.
Happy
Posted: Wed Feb 27, 2008 5:56 pm
Dac wrote:all honda elites 50's...
94-01
are the same bike part for part. The only and only difference is the some bikes are restricted and some are not. All parts are interchangeable.
There are some small differences. I bought a 96 fork for my 98 and the fork fit except it is missing the bearings.
the 98 bearings will not fit over the tube the 96 tube is a hair bigger in diameter.
WHERE DO I GET THE BEARINGS FOR THE 96 FORKS
AND WHERE IS THE BEST PLACE TO BUY A BATTERY FOR A ELITE 150 12v-9 which is bigger than the 50 battery I bought at Walmart.