Page 1 of 1
Carb replacement issues for spree and aero
Posted: Tue Apr 21, 2020 12:04 pm
by turbowrenchhead
Hello, I picked up two machines and they both need a carburetor. The choke assemblies are missing from the orginal oem ones and the both have 35mm wide mounting flanges. The one is a 1986 Honda Spree NQ50. The second is a 1983 Honda Aero 50. I have tried ordering carbs off of ebay and they were both right hand choke and they wouldn't fit. Then I tried two left hand choke and the mounting flange was 48mm. I hoping someone can point me in the right direction.
Re: Carb replacement issues
Posted: Tue Apr 21, 2020 12:37 pm
by Meatball
Were they missing their carburetors to begin with?
Re: Carb replacement issues
Posted: Thu Apr 23, 2020 10:09 pm
by turbowrenchhead
Their not missing. The chokes are missing. Are there chokes and rebuild kits available?
Re: Carb replacement issues
Posted: Thu Apr 23, 2020 10:12 pm
by Meatball
Replacement bystarters can be had on Ebay. Ive bought them before with good results. Just have to pick the right one.
Re: Carb replacement issues for spree and aero
Posted: Mon Apr 27, 2020 10:04 am
by turbowrenchhead
Does anyone offer a rebuild kit?
I have looked on ebay for a replacement choke or rebuild lit and can not find one at this time
Re: Carb replacement issues for spree and aero
Posted: Mon May 04, 2020 3:01 pm
by mousewheels
Does anyone offer a rebuild kit?
I have looked on ebay for a replacement choke or rebuild lit and can not find one at this time
--
I see clones on eBay using 'nq50 bystarter' as the search criteria. The thread mount 83-84 Aero Bystarter may be difficult to find. Always worth posting a request in For Sale/Wanted at this site
-- Rebuild kits
Honda never offered an all in one rebuild kit. But soft parts for your carbs remain available from a Honda dealer and eBay. For soft parts, a gasket kit and the float needle are offered as separate items.
1) Gasket kit -- 16010-GE8-315 - should cover both your Spree and early Aero 50.
2) Float needle is sold alone -- 16155-883-005
I see your models in the used on list, which is too long to list here. Double check all pn's at a Honda parts fiche site.
1983-83 Aero 50 NB50
1984-86 Spree NQ50
ASSEMBLIES WHERE 16010-GE8-315 IS USED
1983 NB50M A - CARBURETOR
1984 NB50M A - CARBURETOR
1984 NQ50 A - CARBURETOR
1984 NQ50 AA - CARBURETOR
1985 NQ50 A - CARBURETOR
1985 NQ50 AA - CARBURETOR
1986 NQ50 A - CARBURETOR
1986 NQ50 AA - CARBURETOR
1986 NQ50D A - CARBURETOR
1986 NQ50D AA - CARBURETOR