Page 1 of 1
wheels
Posted: Wed Dec 06, 2006 9:06 am
by vuego100
Ive got a UK honda melody NSB50, similar to an elite/vision i think?
can I change the rear wheel, the front one i'm gona change anyway as im getting a whole different fork/headset assembly with disc brake, but the back is a drum which fits the engine case are there any after market rims i can fit or am I going to search for something with the same drum size.
I well confused
Posted: Wed Dec 06, 2006 4:56 pm
by MySpree
no, the nsb50 is accutally a aero/elite mixture, you could put centerlines on, but its an ugly rim thats 200 per rim
Posted: Thu Dec 07, 2006 12:41 am
by 85stroka
Live dio's -af35 will fit,but you need either to shave the nut down or switch the axle shaft to one for a symdd50-longer and will allow the nut to fully seat and lock.
WHat model is you bike af??
Posted: Thu Dec 07, 2006 1:20 am
by noiseguy
Where are you located?
wheels
Posted: Fri Dec 08, 2006 8:19 am
by vuego100
Thanks for the info!
I'm actually in the UK, but its difficult to find info overhere on these great little honda's.
Its all mbk's and aerox's over hear, but im determined to get my honda drag project off the ground. Although engine/variator kits etc are proving difficult get hold of im sure i can adapt stuff, but at the moment im getting the frame modifications and the look of the scooter sorted out before I mess with the engine.
Re: wheels
Posted: Fri Dec 08, 2006 10:07 am
by 85stroka
vuego100 wrote:Thanks for the info!
I'm actually in the UK, but its difficult to find info overhere on these great little honda's.
Its all mbk's and aerox's over hear, but im determined to get my honda drag project off the ground. Although engine/variator kits etc are proving difficult get hold of im sure i can adapt stuff, but at the moment im getting the frame modifications and the look of the scooter sorted out before I mess with the engine.
ebay is your friend