Page 1 of 2
Looking for a belt for a Honda NH80/Aero 80
Posted: Mon Aug 26, 2013 9:43 pm
by dbailey
Does anyone know where to buy a new drive belt for a Honda Aero 80? There's a couple on ebay but they're used. Honda seems to have discontinued the part. It could be that the exact same belt is still out there, but sold under a different part number.
Barring that, is there a site where you can order cogged metric belts of arbitrary dimensions? The NH80 takes a 745x15mm cogged belt, 30 degrees.
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Mon Aug 26, 2013 11:28 pm
by patthesoundguy
dbailey wrote:Does anyone know where to buy a new drive belt for a Honda Aero 80? There's a couple on ebay but they're used. Honda seems to have discontinued the part. It could be that the exact same belt is still out there, but sold under a different part number.
Barring that, is there a site where you can order cogged metric belts of arbitrary dimensions? The NH80 takes a 745x15mm cogged belt, 30 degrees.
I've been researching a drive belt replacement for my aero 80 quite a while lately. No luck yet and I've been from one end of the web to the other. I've been meaning to pull my belt and take it in to the belt supply place I go to and get my guy to match it up. As soon as I find something I'll be posting for sure. The size I have for a belt is 23100-GN3-670 726 x 15.0 x 30 I'll have to measure mine and see what it is.
Sent from my Nexus 7 using Tapatalk 2
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Mon Aug 26, 2013 11:37 pm
by patthesoundguy
Google is a funny thing, when you get inspired with a new angle for a search and bam its finally what you are looking for. Here is what I just found.
http://www.beltfrog.com/search/726%20x%2015.0%20x%2030
Not sure how close the three belts are but its a start.
Sent from my Nexus 7 using Tapatalk 2
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Mon Nov 16, 2015 9:49 pm
by charlesmagnus
Hi there, just wondering how you guys went with the belt for the NH80?
I'm struggling to find a replacement out here in Australia for mine Honda Lead (Aero).
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Mon Nov 16, 2015 10:13 pm
by kevinv710
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Tue Nov 17, 2015 5:10 pm
by patthesoundguy
charlesmagnus wrote:Hi there, just wondering how you guys went with the belt for the NH80?
I'm struggling to find a replacement out here in Australia for mine Honda Lead (Aero).
I came up with a replacement I'll have to dig through my posts to remember what the number was. BX26 is my first thought but don't quote me on that.
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Tue Nov 17, 2015 5:35 pm
by Dr_Craw
BTW while i was looking up belts for the nh80 there are 2 different ones
up to 1984 GC8-004 is 726x16x30
1985 GN3-670 is 726x15x30
hope this helps
reference
http://www.impex-corp.co.jp/eng/category/drive-belt.php
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Tue Nov 17, 2015 9:23 pm
by kevinv710
good point Dr_Craw. Thanks man. I owned a 83, so i keep thinking people are talking about 83 only, funny of me sometime...
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Tue Nov 17, 2015 10:42 pm
by patthesoundguy
Nice find there Doc
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Tue Nov 17, 2015 11:12 pm
by charlesmagnus
Thanks for all your help guys. Will pull the trigger on the ebay one and see how I go. Fingers crossed.
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Tue Nov 17, 2015 11:18 pm
by ped
hi db. I wonder if malossi sell a Kevlar belt for your aero?
SWEET looking aero 80 kevin
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Sat Nov 21, 2015 10:43 pm
by johnny248
As for the 23100-GN3-670, I think the guy who put the beltfrog up there is right with this one
https://www.beltfrog.com/part/106002986 ... V726-Bando
From bando. Pretty expensive from thosd guys, but their site is really good, and the sizing looks right on.
Bando 1922v726 (universal belt size from all manufacturers)
Quick search found the same Bando for $43
http://www.vbeltsupply.com/variable-spe ... 726-1.html
Also, they have Goodyear branded new belts on eBay on the cheap.
$18 !
http://www.ebay.com/itm/171999113381
$26!
http://www.ebay.com/itm/151792462519
Or they also have this "D&D PowerDrive" (ddpowerdrive-belt.com) brand belts for about $39 on another site
http://powertranbelting.com/transmissio ... -6-length/
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Thu Sep 08, 2016 2:25 am
by Saltytech42
johnny248 wrote:As for the 23100-GN3-670, I think the guy who put the beltfrog up there is right with this one
https://www.beltfrog.com/part/106002986 ... V726-Bando
From bando. Pretty expensive from thosd guys, but their site is really good, and the sizing looks right on.
Bando 1922v726 (universal belt size from all manufacturers)
I think these are wrong. They look like they're enormous...
From beltfrog site:
Angle: 22
Length - Overall: 73.2 in.
Pitch Length: 72.6 in.
Ribs: 1
Width: 1.1875 in. (1 3/16)
So it looks like the search found 72.6 inches rather than 726 mm...
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Thu Sep 08, 2016 2:33 am
by Saltytech42
BX26 belt is 736.6mm x 16.6 mm x ??
Re: Looking for a belt for a Honda NH80/Aero 80
Posted: Thu Sep 08, 2016 12:23 pm
by Meatball
Ive gotten belts from this site before. Good quality and super cheap prices. Scour their site and see if they have what you need. Or maybe contact them direct with specs by phone to eliminate the headache. If they end up having what you need, I suggest buying a couple extra just for spares. Shipping will kill ya buying 1 at a time!
http://www.vbeltsupply.com/
