Page 1 of 3

1986 Honda Gyro rebuild #2

Posted: Mon Jan 17, 2011 5:36 pm
by chevyguyjay
ok so i found a gyro on craigslist yesterday. i called my buddy dan up and told him about it. well, for the price i think he made out ok. its got potential. mine looked worse than this one. he was asking $300 for it. forgot exactly what dan ended up paying for it. he dropped it off about an hour ago and took a couple pix. notice the 84 muffler?! waiting on dan to come back by so we can give this one a name. not sure what his plans are for it just yet. possibly a different color. lol i noticed the rear Goodyear tires. were going to need parts, so i will post what we need once we start digging in to it we will post what we need. enjoy. :naughty:
Image
Image

Re: 1986 Honda Gyro rebuild #2

Posted: Mon Jan 17, 2011 5:42 pm
by spree-rider
sweet score. here that would have been an easy $800+ dollar gyro.

Re: 1986 Honda Gyro rebuild #2

Posted: Mon Jan 17, 2011 5:44 pm
by PolarIce
Nice project. For a minute there I thought it had been ridden through wet concrete, then I realized that's snow.. :wink:

Re: 1986 Honda Gyro rebuild #2

Posted: Mon Jan 17, 2011 6:25 pm
by motormike
Good find......I'm pullin' for ya, were in this together..... :coolcruise: ...keep scootin'...... :urban:

Re: 1986 Honda Gyro rebuild #2

Posted: Mon Jan 17, 2011 6:27 pm
by motormike
Frame is probably '85 isn't it???

Re: 1986 Honda Gyro rebuild #2

Posted: Tue Jan 18, 2011 7:28 am
by chevyguyjay
heck..i dont even know if its a 85. id have to look. might try and c if i can get it to fire up today.

Re: 1986 Honda Gyro rebuild #2

Posted: Wed Jan 19, 2011 8:39 pm
by chevyguyjay
well,worked on the bike for a little today. removed the carb cause it was pretty bad. still got a itch to start this thing. did a compression test. 125psi. sprayed some oil in the intake and hit the button. fired right up. :ndance: just got some real good connections on parts for this bike and my bike. pix coming soon. :naughty:

Re: 1986 Honda Gyro rebuild #2

Posted: Thu Jan 20, 2011 8:11 pm
by chevyguyjay
ok, carb rebuilt. fired right up! took it out for a quik spin in the snow. lol yea, those tires suck in the snow. :naughty:

Re: 1986 Honda Gyro rebuild #2

Posted: Thu Jan 20, 2011 10:13 pm
by motormike
Any parts used in the carb?.......how bad was it?...... :urban:

Re: 1986 Honda Gyro rebuild #2

Posted: Fri Jan 21, 2011 7:46 am
by chevyguyjay
carb wasnt that bad. soaked it for about a half hour and it cleaned up real nice. :smile: back to ebay to get another filter lol. :coolcruise:

Re: 1986 Honda Gyro rebuild #2

Posted: Sat Jan 22, 2011 7:19 pm
by kparrott
I was looking at buying this! Unfortunately I had to buy text books :(

Good luck with it!

Re: 1986 Honda Gyro rebuild #2

Posted: Mon Jan 24, 2011 4:30 am
by 66SIX
Forget Ebay ...
I called cheap cycle parts . It was $4.00 something & change ... But $10.00 bucks shipping .
Call your local HONDA dealer if they dont have it they can still get it ...w/ shipping it should cost around $5 or 6 bucks .
It was a common Air filter ....

Re: 1986 Honda Gyro rebuild #2

Posted: Mon Jan 24, 2011 8:37 pm
by chevyguyjay
dan came by a little bit ago to pick up his floor boards. he wanted me to post a few pics of the before look. this guys good with plastic. :thumbsup:
Image
Image
Image

Re: 1986 Honda Gyro rebuild #2

Posted: Tue Jan 25, 2011 8:44 pm
by chevyguyjay
dan stopped by again to show me the broken floor board. one day of work and look where he got. godfather at his best with working and repairing plastic. :thumbsup:
Image
Image

Re: 1986 Honda Gyro rebuild #2

Posted: Wed Jan 26, 2011 5:42 pm
by chevyguyjay