Hot Rod 85 Aero 50cc build
Posted: Thu Dec 16, 2010 1:44 am
Hey guys! Just picked up a decent 85 Aero for $200 bucks with title. I am the second owner!!! Its got all of 304.3 miles on it! It was under a heavy tarp in a huge shed. All the lights work, horn works, electric start works, and the motor turns over no problem. Even fired up with a gas/oil gravity feed to the carb. Ran all on its own from idle to full throttle. I am very very happy. It was involved in what looks like a low speed tump. The left side took the grunt: front left blinker lens, lower side panel, and left rear blinker lens and rear cover between the blinkers. The inner cover with the glove box has some cracks from hitting the blinkers. I found a good inner for less than $30 shipped and it's on the way. I am looking for at least the rear left blinker lens and the cover between the two rear lenses. I have found a whole set for the Honda Vision which appears to be the same bike in Canada but can't say if it will work till I buy it for $45 shipped. Take the plunge??? Sounds scary damnit! But, I have plans...
Plans:
1) Obviously get the bike running and riding. Then continue collecting the needed parts to replace/fix the cracks and lighting needs.
2) Drop in my already built 87 SE50 engine which is capable of 54mph.
3) Paint all body work an even flat black
4) wheels a gloss red
5) white wall tires
6) re chrome all chrome parts and polish a few parts to a mirror finish
7) custom pin striping following the old hot rod theme
custom wood floor board with fire scorched ScooterTweaks logo and gloss sealed
I will not start on any of the body or paint till I have all the parts. The polishing and chrome will come after finding all the lenses and covers etc. However I am very excited about this bike. A solid 45-50mph scooter with good cruising speeds and looking very very old school hot rod with the paint scheme and wood floor.
I am looking high and low for these parts so any help is wanted/needed, and so so appreciated!
Parts needed:
left front blinker
left rear blinker lens
rear cover between rear blinker lenses
lower left panel under floor board
The rest I will just try to fix.
A few pics:
http://i981.photobucket.com/albums/ae29 ... G_0810.jpg
http://i981.photobucket.com/albums/ae29 ... G_0809.jpg
http://i981.photobucket.com/albums/ae29 ... G_0808.jpg
http://i981.photobucket.com/albums/ae29 ... G_0807.jpg
http://i981.photobucket.com/albums/ae29 ... G_0813.jpg
http://i981.photobucket.com/albums/ae29 ... G_0814.jpg
http://i981.photobucket.com/albums/ae29 ... G_0815.jpg
http://i981.photobucket.com/albums/ae29 ... G_0811.jpg
http://i981.photobucket.com/albums/ae29 ... G_0819.jpg
http://i981.photobucket.com/albums/ae29 ... G_0820.jpg
http://i981.photobucket.com/albums/ae29 ... G_0823.jpg
http://i981.photobucket.com/albums/ae29 ... G_0825.jpg
Not so bad really. Comments, parts, general ideas let me know. Thanks and keep watching as I will post more pics as I clean it and get the body back to shape.
Plans:
1) Obviously get the bike running and riding. Then continue collecting the needed parts to replace/fix the cracks and lighting needs.
2) Drop in my already built 87 SE50 engine which is capable of 54mph.
3) Paint all body work an even flat black
4) wheels a gloss red
5) white wall tires
6) re chrome all chrome parts and polish a few parts to a mirror finish
7) custom pin striping following the old hot rod theme
I will not start on any of the body or paint till I have all the parts. The polishing and chrome will come after finding all the lenses and covers etc. However I am very excited about this bike. A solid 45-50mph scooter with good cruising speeds and looking very very old school hot rod with the paint scheme and wood floor.
I am looking high and low for these parts so any help is wanted/needed, and so so appreciated!
Parts needed:
left front blinker
left rear blinker lens
rear cover between rear blinker lenses
lower left panel under floor board
The rest I will just try to fix.
A few pics:
http://i981.photobucket.com/albums/ae29 ... G_0810.jpg
http://i981.photobucket.com/albums/ae29 ... G_0809.jpg
http://i981.photobucket.com/albums/ae29 ... G_0808.jpg
http://i981.photobucket.com/albums/ae29 ... G_0807.jpg
http://i981.photobucket.com/albums/ae29 ... G_0813.jpg
http://i981.photobucket.com/albums/ae29 ... G_0814.jpg
http://i981.photobucket.com/albums/ae29 ... G_0815.jpg
http://i981.photobucket.com/albums/ae29 ... G_0811.jpg
http://i981.photobucket.com/albums/ae29 ... G_0819.jpg
http://i981.photobucket.com/albums/ae29 ... G_0820.jpg
http://i981.photobucket.com/albums/ae29 ... G_0823.jpg
http://i981.photobucket.com/albums/ae29 ... G_0825.jpg
Not so bad really. Comments, parts, general ideas let me know. Thanks and keep watching as I will post more pics as I clean it and get the body back to shape.











