Honda Spree and Elite 50 Forums

Posted: **Wed May 30, 2007 10:15 pm**

ok im going to do this, my take off now is insane now if i do this it would be crazy.
also do i lose any top speed?

Posted: **Thu May 31, 2007 3:54 pm**

probabl not but iv nevr done this to a more powerful bike. meh stock mufflers are cheap on ebay

Posted: **Sun Jun 03, 2007 2:12 am**

Kenny_McCormic wrote:

Didn't have a drill bit that big so i hammered a very long nail into the muffler from the end hole. Worked great and i got through the first few baffles (nasty growl now and picked up 3 mph), but with about 6 inches of the nail left outside it started to go through the wall due to the angle of the end hole. Any way around this?

Posted: **Sun Jun 03, 2007 10:22 am**

saw the tip off finish the job and weld a bigger one on i never had thae problem your describing

Posted: **Mon Jun 04, 2007 1:07 am**

My exhaust looks different from yours. Maybe it's a different year?

Posted: **Mon Jun 04, 2007 8:06 am**

That looks to be a Spree exhaust or something similar...Looks just like the exhaust on my '85 Spree.

Posted: **Mon Jun 04, 2007 4:55 pm**

you have a nice exaust mine is a pile of s*** all rusy with a big dent in the downtube. its a miracle it runs BUT IT DOES I HAVE A VIDEO

Click here to watch ITS-ALIVE-53 yes i know its running really rich and bogging right now because it has no air filter and i had a rag in the airbox so i wouldnt ruin the motor

Honda Spree and Elite 50 Forums

Give Your Spree More HP