Page 3 of 9
Re: Too many build threads- 01 Honda Elite
Posted: Tue Jun 09, 2015 11:20 am
by hothatch85
previous owner had 7,8,7,8,7,8 combo. way to heavy
clutch has green springs and is maxed the f out. might try the yellow springs after the lighter weights.
my ruima variator was a b**** to get on and off. the ramp plate is like the same exact size as the crankshaft so you really gotta jimmy it to get it off or on. not cool.
Re: Too many build threads- 01 Honda Elite
Posted: Sun Jun 14, 2015 3:48 pm
by hothatch85
I was trying to race that 171 again the other day and after holding wot for awhile I let off. When I tried to get back on it the throttle didn't respond and then something caught, I'm thinking the belt, the rear wheel locked up and the bike shut off. Then I rolled to a stop. All this happened at 50+ mph. This has only happened once before
Re: Too many build threads- 01 Honda Elite
Posted: Sun Jun 14, 2015 6:32 pm
by 1man8scoots
The rear wheel locked up at 50 and you made it out unhurt is awesome. Lucky!
Re: Too many build threads- 01 Honda Elite
Posted: Sun Jun 14, 2015 7:03 pm
by hothatch85
It locked up, killed the motor and then un locked and I rolled to a stop. Maybe variator and belt. The ruima gets like stuck on the crank shaft
Re: Too many build threads- 01 Honda Elite
Posted: Sun Jun 14, 2015 9:37 pm
by whitey
I have felt that same thing happen before too. I seized after WOT trying to see how fast I could go. I was on my Gilera Runner with a 172cc two stroke engine. Somewhere around 75mph it seized and that stopped the belt from turning which stops the tire from turning because the clutch is engaged. Eventually the clutch releases and you cost to a stop.
Re: Too many build threads- 01 Honda Elite
Posted: Mon Jun 15, 2015 12:02 am
by hothatch85
The bike fired right bike up once I got stopped. I don't think I'm seizing the piston, at least I hope not!
Re: Too many build threads- 01 Honda Elite
Posted: Mon Jun 22, 2015 9:50 pm
by hothatch85
Let a friend ride the elite tonight. Get a text a little later saying he was hauling * giving her all she had and it shut off. Kick start doesn't move. She's hard seized. Yayyyy
Re: Too many build threads- 01 Honda Elite
Posted: Mon Jun 22, 2015 9:59 pm
by Rip_City_Spree
Ah crap that sucks hatch
Re: Too many build threads- 01 Honda Elite
Posted: Mon Jun 22, 2015 10:06 pm
by 1man8scoots
Rebuild time. Do her right and never fear the seize!
Re: Too many build threads- 01 Honda Elite
Posted: Tue Jun 23, 2015 12:36 am
by hothatch85
He said he would reinbure me for the cylinder so that's cool. Good thing I ordered an Athena bore with G9 last week.
Just sucks cause I was gonna reuse this cylinder on second dio build. Now I dunno what to do with that
Re: Too many build threads- 01 Honda Elite
Posted: Tue Aug 04, 2015 5:50 pm
by hothatch85
She's coming back. New af16 block with 72cc Athena kit also new motor shrouds.
Can't forget about the OEM dio wheels
Old tawi *
Re: Too many build threads- 01 Honda Elite
Posted: Tue Aug 04, 2015 6:05 pm
by 1man8scoots
You could totally jb weld that hole! Nice new build you have going!
Re: Too many build threads- 01 Honda Elite
Posted: Tue Aug 04, 2015 6:24 pm
by Rip_City_Spree
Looks great
Re: Too many build threads- 01 Honda Elite
Posted: Tue Aug 04, 2015 10:51 pm
by hothatch85
The elite rips and the plug is perfect. It's a bit of a dog on the bottom. Like gutless. How does one go about getting on the polini yellow springs on the clutch?
Re: Too many build threads- 01 Honda Elite
Posted: Wed Aug 05, 2015 4:44 am
by veedubh20
lol hole on the piston
c21 is a better pipe and match athena bore.
