Page 2 of 4
Posted: Fri Sep 19, 2008 8:32 pm
by Kenny_McCormic
What all is in the motor?
Posted: Fri Sep 19, 2008 9:20 pm
by Towlieee
tru72 wrote:yes burnt that was a 1/4 mile run! guys were flipping at the track , since alot of street cars are in that area of time! haha last time i grudge matched a honda 400 dirt bike, lost to him at the top end,played catch up from the start. He blew up his motor trying to beat me HAHA!
Tow, yes that stretch works! I pull 2.1 sec in the 60 fot timer, alot faster than most street cars. As of now it spins the tire about 6 feet off the line. I just dropped the front even more as in the pic. it use to be higher, it used to carry the front wheels for 3 to 4 feet. So i figured it looks nicer dropped, i can survive it not pulling the wheels for now. We tested some NOS on another bike, once we figure it out, then ill slap my set up on. From the testing so far, im defiantly going to make some wheelie bars!
ill get some other pics of under the seat and stuff, it turned out pretty kool! got some other pics of it at my myspace,!
aloha
D
sweeet!
I didn't know what kind of power can be had from a scoot!
Didn't know if the lowering was just for looks, or for GO! lol
edit: man 2.1 secon 0-60... Thats crazy! If I remember right, I think I ran a 2.0 0-60 on my 600cc 90hp+ sport bike! lol..
And that was launching hard, riding the clutch off the line!
re-edit: nevermind, my 0-60 time was 2.5 seconds! Your scooter smokes my bike tell 60mph lol
But then again, my 02 f4i, is now considered a 'sport tourer' lol
Definitely dope! Crazy fast for a scooter!
Posted: Fri Sep 19, 2008 10:06 pm
by Dac
Kenny_McCormic wrote:What all is in the motor?
tru72 wrote:jus had to do a few welds for the floor to fit. LOL its all old plastics so some of the tabs are missing, thats why god invented zip ties haha! The fork is just cut and slammed, dont need any travel since the track is nice and flat. I didnt do a disc front end, way to heavy, and the track has alot of run off so the front brakes are fine, good for bun outs!
As for the motor right now im borrowing a customers one i built for him a few months ago. Its a 121cc 54 bore X 52.6 crank, 33 keihin carb, custom pipe, 8.5 gears. So far it ran a 9.6 @ 68 mph in the 1/8 , 16.0 @ 73 mph. For a none ported bore it runs pretty well! If everything works out i should have my new motor done by the next race..
aloha
D
Kenny, it was in the 2nd reply, how did you miss it?
Posted: Fri Sep 19, 2008 10:14 pm
by Kenny_McCormic
My brain is a POS.
Posted: Fri Sep 19, 2008 10:18 pm
by Dac
Kenny_McCormic wrote:My brain is a POS.
do a plug chop
Posted: Fri Sep 19, 2008 10:39 pm
by burnt_toast
Dac wrote:Kenny_McCormic wrote:My brain is a POS.
do a plug chop
QFT!
haha
Posted: Sat Sep 20, 2008 12:31 am
by tru72
LOl thanks guys for al the posts!
Im glad that here we have a place to play with stuff like this. The next race il try to get some pics of al the bikes and stuff there!
aloha
darin
ps yes , theres alot of plug chopping going on at the track! Kenny would have a field day there LOL
bars
Posted: Sat Sep 20, 2008 1:19 am
by eight08boy
would you sell me an 89 bar to mount an aranda headset
Posted: Sat Sep 20, 2008 1:25 am
by tru72
lol jus buss out a welder and make some brackets.. lol thats what im going to do for my other 89..
i would
Posted: Sat Sep 20, 2008 9:50 am
by eight08boy
i would but i dont have a welder still a kid
Posted: Sat Sep 20, 2008 10:16 am
by Kenny_McCormic
You can get a cheap wirefeed hobby welder for $100 at a harbor freight.
Posted: Sat Sep 20, 2008 1:18 pm
by Dac
tru72 wrote:LOl thanks guys for al the posts!
Im glad that here we have a place to play with stuff like this. The next race il try to get some pics of al the bikes and stuff there!
aloha
darin
ps yes , theres alot of plug chopping going on at the track! Kenny would have a field day there LOL
man, if you got allot of pictures from the drag strip posted up here, you would be like GOD.
Posted: Sat Sep 20, 2008 3:40 pm
by tru72
LOL hurry over and take some pics for me hahaha!
its so dam hard in between runs tuning my bike and helping out the other guys with their stuff too. Most times i have about 4 bikes running my name "N4S motorwerx" there, so they are all close friends, but most times we all try to help out any moped person there if possible. At one time we had 12 people show up, pretty nutz stuff. Also there are a few xr50s, smal quads,dirt bikes that also run. The outlaw races are alot of fun , for 5 bucks gate fee and 5 bucks tech fee you can run from 12 noon to midnight, weather permitting!
Posted: Sat Sep 20, 2008 7:02 pm
by Dac
im packing up my s*** right now.
hey, can you loan me $however much a plain ticket to Hawaii Cost$ ?
Posted: Sat Sep 20, 2008 8:46 pm
by tru72
haha i jus saw a thing on tv on how people try to ship them selves in crates.. lol let me find the link for you HAHAHA