performance pipe
Posted: Tue Feb 06, 2007 4:14 pm
I will go $100 for one, let me know, thanks
scoot forever
scoot forever
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://www.fastfoamfilter.com/hondaspree.net/phpBB3/
Tuned performance pipe for Spree...
http://www.fastfoamfilter.com/hondaspree.net/phpBB3/viewtopic.php?t=283
Page 10 of 11
Posted: Tue Feb 06, 2007 9:27 pm
I've PM'd you on this.
Posted: Wed Feb 07, 2007 7:55 am
d*** enough post..
Re: Tuned performance pipe for Spree...
Posted: Thu Jul 05, 2012 6:36 am
noiseguy wrote:How much would you be willing to pay for a tuned pipe for the Honda Spree? This is for a pipe that's been proven to work on at least one Spree and gets some sort of speed improvement. Vote up above, as far as what you'd want to pay and what you'd want to get. This is something I've been puttering with for awhile. It won't take much more work to knock out several of these if I have to build one.
I thought Dallasmysterycrew was going to take this on, but I haven't seen anything from him for awhile now, so who knows where he is on this project....
Re: Tuned performance pipe for Spree...
Posted: Thu Jul 05, 2012 6:45 am
stucinthe80z wrote:noiseguy wrote:How much would you be willing to pay for a tuned pipe for the Honda Spree? This is for a pipe that's been proven to work on at least one Spree and gets some sort of speed improvement. Vote up above, as far as what you'd want to pay and what you'd want to get. This is something I've been puttering with for awhile. It won't take much more work to knock out several of these if I have to build one.
I thought Dallasmysterycrew was going to take this on, but I haven't seen anything from him for awhile now, so who knows where he is on this project....
Re: Tuned performance pipe for Spree...
Posted: Thu Jul 05, 2012 6:56 am
i have a pipe i can supply if you would like .you could also ask or charge a core for the downpipe and you would have a supply of fresh pipes coming in i would be willing to to buy
Re: Tuned performance pipe for Spree...
Posted: Fri Jul 06, 2012 8:13 pm
this is kind of off topic, but if someone wants to use the pb chamber in its stock form here is something to be aware of. I put one of these on my express and found the pb header pipe extended 2" into the chamber! No wonder the Pocket bike had a strange growl to it and would not rev up cleanly. The chamaber works very well and upped my top speed. The header pipe of the express fit perfectly snug into the pipe of the chamber so I drove the bike ith the chamber slid on and got to mess with the header length to get it where i had decent results then weld weld weld 
Re: Tuned performance pipe for Spree...
Posted: Wed Jul 11, 2012 2:48 pm
Wow, this is an old topic.
You've got the right idea. Spree are a little harder in that you need to cut and weld the chamber around the fan assembly. I made a few copies of chambers with shirt cardboard and trialed a few cuts until I got one that worked... was the right angle and length.
Otherwise, it's just as you describe.
You've got the right idea. Spree are a little harder in that you need to cut and weld the chamber around the fan assembly. I made a few copies of chambers with shirt cardboard and trialed a few cuts until I got one that worked... was the right angle and length.
Otherwise, it's just as you describe.
Re: Tuned performance pipe for Spree...
Posted: Wed Jul 11, 2012 2:52 pm
I've had a few ppl contact me about exhausts since. My issue is that I no longer actually own a Spree to weld them up... I'd actually need to build a jig. I have 1/2 of a Spree longblock left, an old jug, fan cover... I'd need to assemble up the rest of the pieces... I think I'm just missing the Spree exhaust side of the case.
Tell you all what. If you can get 5 ppl together that want pipes I'll make up a batch. Same price, same deal. You need to send me a downpipe. And between you all, someone needs to find me an exhaust side Spree case.
Tell you all what. If you can get 5 ppl together that want pipes I'll make up a batch. Same price, same deal. You need to send me a downpipe. And between you all, someone needs to find me an exhaust side Spree case.
Re: Tuned performance pipe for Spree...
Posted: Wed Jul 11, 2012 4:54 pm
i will send you one NG
PM me with your address.
PM me with your address.
Re: Tuned performance pipe for Spree...
Posted: Wed Jul 11, 2012 5:30 pm
noiseguy wrote:I've had a few ppl contact me about exhausts since. My issue is that I no longer actually own a Spree to weld them up... I'd actually need to build a jig. I have 1/2 of a Spree longblock left, an old jug, fan cover... I'd need to assemble up the rest of the pieces... I think I'm just missing the Spree exhaust side of the case.
Tell you all what. If you can get 5 ppl together that want pipes I'll make up a batch. Same price, same deal. You need to send me a downpipe. And between you all, someone needs to find me an exhaust side Spree case.
I was literally 5 min from emailing MLM about a custom
I'm intersted in the grup buy
Re: Tuned performance pipe for Spree...
Posted: Wed Jul 11, 2012 7:53 pm
Ok, I've got a line on a Spree block... I'll need to pull together the parts to make sure I've got everything else.
Everyone got downtubes from a stock exhaust? I don't think I have any of those left.
Everyone got downtubes from a stock exhaust? I don't think I have any of those left.
Re: Tuned performance pipe for Spree...
Posted: Wed Jul 11, 2012 10:16 pm
noiseguy wrote:Ok, I've got a line on a Spree block... I'll need to pull together the parts to make sure I've got everything else.
Everyone got downtubes from a stock exhaust? I don't think I have any of those left.
I'm ready
Re: Tuned performance pipe for Spree...
Posted: Thu Jul 12, 2012 12:29 am
I see a lot of SB50 in that pile...
Re: Tuned performance pipe for Spree...
Posted: Thu Jul 12, 2012 5:17 pm
I have an Iowa pipe