Speed Pulley

mopedman · Post by **mopedman** » Sat Jun 07, 2008 11:31 pm

its not that the swearing bothers me, i swear all the time, but you guys got to understand that this a public site and there are allot of people on here that could get offended and there is allot of miners on here

Kenny_McCormic · Post by **Kenny_McCormic** » Sat Jun 07, 2008 11:32 pm

CharlotteSpreeRider wrote:Can someone pass the popcorn?

Thanks!

-aseigler

Lol, but seriously, a motor shouldn't * backfire (or f*** up in any way under any condition) if you can tune one properly.

monkeywrench · Post by **monkeywrench** » Sat Jun 07, 2008 11:37 pm

it doesnt really back fire it gets to hot at wot for about 15 min of driving than it bogs and make a back fire type sound becouse to much fuel is being dumped in when its really hot

Kenny_McCormic · Post by **Kenny_McCormic** » Sat Jun 07, 2008 11:43 pm

Well, then you cant tune, because it you could you would know a richer pilot jet would cool it down.

monkeywrench · Post by **monkeywrench** » Sat Jun 07, 2008 11:45 pm

f*** you im sick of this s*** im out , im done with this sight

mopedman · Post by **mopedman** » Sat Jun 07, 2008 11:49 pm

Kenny_McCormic wrote:
CharlotteSpreeRider wrote:Can someone pass the popcorn?

Thanks!

-aseigler

Lol, but seriously, a motor shouldn't * backfire (or f*** up in any way under any condition) if you can tune one properly.[/quote

come on guys you know not to swear on here, and don't leave just cuz some people a being D***s about stuff there is still allot of good people here on the site

mopedman · Post by **mopedman** » Sat Jun 07, 2008 11:50 pm

Can one of the Mods, plzz lock this post it is starting to get out of hand

CharlotteSpreeRider · Sun Jun 08, 2008 12:07 am

Pass the popcorn first!

Fighting on Internet forums is like competing in the Special Olympics...whether you win or lose, you're still a retard.

-aseigler

aloha · Post by **aloha** » Sun Jun 08, 2008 12:33 am

Kenny_McCormic wrote:Well, then you cant tune, because it you could you would know a richer pilot jet would cool it down.

Kenny knows what I'm talking about. We're not trying to be "penisis" were just trying to keep the op informed of what's real.

adark248 · Post by **adark248** » Sun Jun 08, 2008 1:15 am

Kenny knows what I'm talking about. We're not trying to be "penisis" were just trying to keep the op informed of what's real.

I'm not exactly sure, but the correct usage might be "penisi."

kind of like octipi, but with weiners.

*passes CSR the popcorn, extra butter*

monkeywrench · Post by **monkeywrench** » Sun Jun 08, 2008 1:35 am

aloha wrote:
Kenny_McCormic wrote:Well, then you cant tune, because it you could you would know a richer pilot jet would cool it down.
Kenny knows what I'm talking about. We're not trying to be "penisis" were just trying to keep the op informed of what's real.

i have a 130 main in my 24mm carb, thats pleanty rich enough and im preaty shure that if you ran full throttle for a long period of time your going to be running hot

jstone · Post by **jstone** » Sun Jun 08, 2008 1:36 am

aloha wrote:I still say B.S. No way you can hit 43-47 with just a pulley mod. And so what if it's an SR, that's basically a derestricted S. It also seems you are not the original owner so you don't know for sure the gears were not replaced and you were not informed. Pulley mod will get moped up to speed faster and does not make you bike gain MPH's. Gears will give you more top end. If you only weigh 90 LBS., was going down a steep hill and had a gust of wind behind you, then maybe.

***END OF THREAD, STFU!!!***

But a pulley WILL give you more top end won't it? Regardless of how much, the general consensus is that it does improve top speed.

monkeywrench · Post by **monkeywrench** » Sun Jun 08, 2008 1:38 am

yes it gives you better top speed and doesnt hurt your bottom end either

jstone · Post by **jstone** » Sun Jun 08, 2008 1:41 am

ALSO, it seems that monkeywrench is dealing with a pulley that nobody else has ever installed. Its not the usual Keli pulley so i don't see how his results can be compared to anybody elses unless they have used the same thing. Of course you may say that no pulley will give that much increase, but how can you be sure when no one else (atleast anybody i've ever seen on here) has tried this besides him?

monkeywrench · Post by **monkeywrench** » Sun Jun 08, 2008 1:42 am

jstone wrote:ALSO, it seems that monkeywrench is dealing with a pulley that nobody else has ever installed. Its not the usual Keli pulley so i don't see how his results can be compared to anybody elses unless they have used the same thing. Of course you may say that no pulley will give that much increase, but how can you be sure when no one else (atleast anybody i've ever seen on here) has tried this besides him?

thank you