I'm bummed...

Kenny_McCormic · Post by **Kenny_McCormic** » Mon Jul 02, 2007 6:43 pm

Mine had this problem the little ports on the lid that let the air in were plugged up with a mixture of dirt and oil.

chevyguyjay · Post by **chevyguyjay** » Mon Jul 02, 2007 8:17 pm

what does your foam filter look like? it is the factory one right? clean it with some soap and warm water, then re-oil it. dont saturate it though. ring it out good. its sounding to me that u still have carb issues. hows your spark plug? is it a ngk? whats the gap? that color is it burning? black? brown? u want a nice light to gold brown. check your gap. im curious

keep us informed in what your doin. ill keep trin to help ya get that scoot goin.

lifecaptured · Post by **lifecaptured** » Thu Jul 05, 2007 10:16 am

Ok...the hoopty is alive, and well (so far!). I rode it yesterday for about an hour straight!! I think I just didn't have the air and idle screws adjusted right.

Right now it doesn't have an airfilter at all. But, I ordered a stock one from Honda that should be in in a couple days. So, once I get that, put the lid on, I'm sure I'll have to adjust it again.

It seems to run real good. It's a dog on take off from a dead stop, but get's up to about 26-27, and on a good flat will hit 30-31...so, that's good, right??

I haven't pulled the plug since I've got it running to see what color it is...I need to do that this weekend.