who needs a big bore kit to go over 30mph (Spree)

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

jokim00
Goped
Goped
Posts: 74
Joined: Sat Sep 17, 2011 4:43 am
Location: Seattle, WA

Re: who needs a big bore kit to go over 30mph (Spree)

Post by jokim00 »

gasp!
i was so stumped and amazed by your speedo haha
man..is there any way to increase the speedo's accuracy? :/
Red 1986 Spree
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9244
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: who needs a big bore kit to go over 30mph (Spree)

Post by Bear45-70 »

jokim00 wrote:gasp!
i was so stumped and amazed by your speedo haha
man..is there any way to increase the speedo's accuracy? :/
Bigger front tire will help but a 2.75X10 only fixes about half the error. I have not heard of anyone who fit a 3.00X10 tire check the speedometer accuracy with a GPS. The other problem is the error stays the same percentage off but the numbers error gets bigger the faster you go. If you are off 1 mph at 10 mph = 3 mph off at 30 mph = 4 mph off at 40 mph, etc......................
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
jokim00
Goped
Goped
Posts: 74
Joined: Sat Sep 17, 2011 4:43 am
Location: Seattle, WA

Re: who needs a big bore kit to go over 30mph (Spree)

Post by jokim00 »

Bear45-70 wrote:
jokim00 wrote:gasp!
i was so stumped and amazed by your speedo haha
man..is there any way to increase the speedo's accuracy? :/
Bigger front tire will help but a 2.75X10 only fixes about half the error. I have not heard of anyone who fit a 3.00X10 tire check the speedometer accuracy with a GPS. The other problem is the error stays the same percentage off but the numbers error gets bigger the faster you go. If you are off 1 mph at 10 mph = 3 mph off at 30 mph = 4 mph off at 40 mph, etc......................
The heck.......well, not everything can be perfect.
Red 1986 Spree
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: who needs a big bore kit to go over 30mph (Spree)

Post by swimmingfree »

Spreetard
been wanting for you to jump in and glade to see you here on my post !!!
your im put will help all of us that have that turd of a motor LOL LOL ..

the spree is a gate way ride.. you no frist you by it because its cheep !! then you want more and more out of it then one day you wake up and see that you have lots of moped in your garage ?? you no if you smoke pot you will become a homeless junkie .. well that what they told us in school in the 70..

so please put a link to your build up here as will as your input
thank you
swimmingfree

P.S.
bear is right honda made it off so we wood feel like were flying lol lol.. gps is the only way to get the true speed on in thing cars are off as well but not as munch
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Spreetard
Elite
Elite
Posts: 800
Joined: Mon May 04, 2009 7:28 pm
Location: Manistee, Mi

Re: who needs a big bore kit to go over 30mph (Spree)

Post by Spreetard »

Intake:
http://www.hondaspree.net/phpBB3/viewto ... =4&t=14730

Exhaust port:
http://www.hondaspree.net/phpBB3/viewto ... =1&t=13547

Other than that, there are a few pics scattered here and there, but there is no proper build thread. The 42mph spree was the result of much tinkering over a long period of time. I usually forget to take pictures while I'm working.
Ol' Red
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
Post Reply