VT CYCLES
Moderator: Moderator
VT CYCLES
ordered a pulley from vt cycles. id never have expected such fast service from honolulu to california. vt cycles changed out the rollers at no charge to make it better for my weight.my se 50 p now rocks. great service parts & prices. THANK YOU VERY MUCH 
- KingJeff801
- Board Supporter

- Posts: 584
- Joined: Mon Jun 14, 2010 9:16 pm
- Location: S.L.UT
Re: VT CYCLES
good peeps at VT 

2001 Elite S
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
72cc Corsa
24mm OKO
Scorpion Pipe
Pic and Vid post
http://www.hondaspree.net/phpBB3/viewto ... =pic+video
Gun Post
http://www.hondaspree.net/phpBB3/viewto ... =6&t=27051
Wrong Side Kings 4 Life
- tazland001
- Board Supporter

- Posts: 1218
- Joined: Thu Apr 30, 2009 11:46 pm
Re: VT CYCLES
I have never heard a bad thing about VT cycles. Those are some stand up guys over there.
Taz
Taz
-
sprite2011
- Spree

- Posts: 196
- Joined: Tue Jun 28, 2011 11:24 pm
- Location: Virginia Beach
Re: VT CYCLES
I see that the only way to order is by calling them.
-
onna spree
- Spree

- Posts: 118
- Joined: Fri Dec 10, 2010 10:08 pm
- Location: Milport In.
Re: VT CYCLES
That's not a bad thing, the ole phone method. 
Re: VT CYCLES
there awsome. you can order via email as well, sometimes there hard to get on the phone.
vtcycles@gmail.com <vtcycles@gmail.com>
vtcycles@gmail.com <vtcycles@gmail.com>
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
