Nicely finished and all. I hope I'm mistaken, but it looks like the hitch is bolted to the engine via the M6 head bolts. Yikes!
I'm thinkin' about the half-inch or so of those threads screwed into an unsprung engine crankcase that bounces vigorously up and down with pavement patches and potholes. It kinda makes me wince. Now hang a steel ball and trailer hitch with a load of Malty Soda hanging on back there a-yankin' an' a-*.
Nah, it'll probably be OK...
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
hey wheelman, yea i dont plan on pulling anything. its basicly just for looks. i will be taking it to the downriver cruise tomorrow and saturday. me and dan both will be out in gyro force lol. i think dan wants to pull the trailer with his bike. should be fun.
yes bear. me and dan discussed this already and yes u are right. but...this is just for show. we are considering making up a one off custom hitch that bolts up underneath the engine and frame. another custom flatbed trailer may be in the works. not to sure yet.
chevyguyjay wrote:yes bear. me and dan discussed this already and yes u are right. but...this is just for show. we are considering making up a one off custom hitch that bolts up underneath the engine and frame. another custom flatbed trailer may be in the works. not to sure yet.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3 '85 Aero 80 '84 Aero 125 X 2
'84 Aero 125 '84 Aero 125 X 2 '85 Aero 50
'85 Spree
ok everyone. first, i just wanna give a special thanks to some people that helped with this build. Jay and Jim our fabricators and Bob for the signs. the gyros are just so rare around here and seeing one with a custom little trailer....cant ask for more. think it turned out just right. a one off custom flat bed will be in the works soon along with a new and improved hitch. 66six....we were thinking of u!
think you're gonna need some higher ratio gears to get that boat going...
but i can see it now...just like a tug boat.
gear the scoot low and slow w/ hella torque...
i would pay to see a spree or other moped tow something like that.
Check this out and it's close to you .
You will probably never find one as nice as this
This guy dosen't relize what these are worth .
Dan you need this one for your collection .
Attachments
Screen shot 2011-06-28 at 6.57.jpg (140.92 KiB) Viewed 7856 times
hey 6, thats dans old gyro. he sold it to a guy around our neighborhood and he must of sold it to someone. look at the moped sticker plate. thats dans specialty lol. also the high/low beam sticker he had made.
