wound up

[Bear45-70]

Hahahahaha

Still no pictures or varification by anyone that there is a variator on a Spree or any proof of your of your unbelievable speed claim. But then you and * Puppy have a lot in common.

[ae86guy]

I had 43 without the vari when i get a camera i will post some pics 2 make u all happy the rear pulley does work alltho not as good as the larger pulley but it works i had a new centre spring made 4 $20 with less tention than stock im running a wider belt and using 12g rollers and a dj1 af05e crank not the spree crank and yes that crank does not fit unless u hav the case machined 2 suit the crank also needed another alloy base gasket made 4 the jug is it really that hard 2 belive that this works and yes the cover does not fit i hav cut 2 covers in half the spree case inside edge 4 the bolt holes and the dj1 cover 4 the outside then welded them 2gether with a step up between them this is proveing 2 b the biggest issue as im still trying 2 get it right so the kick start works

[Bear45-70]

I await the pictures, because this sounds extremely interesting.

[ae86guy]

Is that it bear no little girl comments or telling me that this is imposible 2 do with a spree motor

[Bear45-70]

Is that it bear no little girl comments or telling me that this is imposible 2 do with a spree motor

I never said "impossible", I said more trouble than it is worth and economically not worth the effort (Taz dropping the project proves the latter). You act like you are serious and don't get * and I won't either. But I do however require some sort of evidence, either collaboration from someone else or at least pics.

[eliteguy50]

...FYI Americans are pretty good innovators. They've given us the Lunar Landing, Velcro, and SpongeBob SquarePants. ...

I wish they would have skipped the last one

[fastplastic]

Hahahahaha

Still no pictures or varification by anyone that there is a variator on a Spree or any proof of your of your unbelievable speed claim. But then you and * Puppy have a lot in common.

i have to say the calms and pictures i have recived from maddog are not out of reach of the bike he has, but that does not mean i support any calm he has made on this fourm, but from the email and pic.s he has sent me i have to say maddog might not be as full of crap as you may think.... dont get me wrong i could still be wrong..... and please dont ask me to share pics only way i got them was to make a promise not to and i do keep my word....

[fastplastic]

...FYI Americans are pretty good innovators. They've given us the Lunar Landing, Velcro, and SpongeBob SquarePants. ...

I wish they would have skipped the last one

spreetard has a bright yellow spongbob wallet and loves it more then the air he breaths lol no joke...

[Bear45-70]

Hahahahaha

Still no pictures or varification by anyone that there is a variator on a Spree or any proof of your of your unbelievable speed claim. But then you and * Puppy have a lot in common.

i have to say the calms and pictures i have recived from maddog are not out of reach of the bike he has, but that does not mean i support any calm he has made on this fourm, but from the email and pic.s he has sent me i have to say maddog might not be as full of crap as you may think.... dont get me wrong i could still be wrong..... and please dont ask me to share pics only way i got them was to make a promise not to and i do keep my word....

Chances are that the reason the pics are not to be shared are that the scooter belongs someone else or the secrecy would be unnecessary. With the lack of real knowledge he has displayed I doubt very much he know how to change the spark plug.

[fastplastic]

could be the case.....

[tazland001]

Your kidding right. Americans are not stupid. Some Americans are but it is no different than any other country.

I do not use American engineers when designing parts so are the Japanese stupid also? I don't think so. There are to many obsticles on making a spree variater from the investment side of things. It can be done but the cost is to high from a production standpoint. New design and new molds would easily cost easily over 10,000usd. It is just not worth it. I think once the expansion chamber muffler comes out and then I get an intake manifold adapter made we will see the spree screaming like a rapped ape.

ae86guy I got no beef with you. Just post a few pics for us to see. I am glad you are experimenting. Did you see the other spree variator using the yami parts?

Taz

[ae86guy]

I will post some pics when i get another camera which aint on my 2 do list hav better things 2 spend my $ on like my boy and my ae86 im not going and buying one 2 prove 2 some guys on the net wat ive done i know wat ive done and really dont care wat you all think ive also just had a board warning which is fu cked the member that needs it is bear

[Bear45-70]

I will post some pics when i get another camera which aint on my 2 do list hav better things 2 spend my $ on like my boy and my ae86 im not going and buying one 2 prove 2 some guys on the net wat ive done i know wat ive done and really dont care wat you all think ive also just had a board warning which is fu cked the member that needs it is bear

Well, you are back to being your old self, a liar!

[konaking]

I got a board warning for potsing up pics of my homegrown

[fastplastic]

I will post some pics when i get another camera which aint on my 2 do list hav better things 2 spend my $ on like my boy and my ae86 im not going and buying one 2 prove 2 some guys on the net wat ive done i know wat ive done and really dont care wat you all think ive also just had a board warning which is fu cked the member that needs it is bear

: still full of crap i c!