Honda Spree and Elite 50 Forums

I'd be very interested in the kickstart assembly and cover. If you want to keep the motor complete, I'd probably take the entire engine off your hands. I could also use the autochoke.

It's an Aero 50, not a spree. It still does an easy 40mph, just like it always did. If you guys really think airflow from that little fan is greater than airflow from going down the road at 25+ with no plastics I suppose I won't convince you otherwise. Either way, the bike runs great, it has never ...

It's an Aero 50, not a spree. It still does an easy 40mph, just like it always did. If you guys really think airflow from that little fan is greater than airflow from going down the road at 25+ with no plastics I suppose I won't convince you otherwise. Either way, the bike runs great, it has never ...

yep, weight should only be a factor in acceleration and hills.

Hobbits are sweet, they are one of the few variated mopeds. I'd pay 200 or so for a non running one, more for a runner.

Motobecane 40t
AV10 cases
Doppler performance crank.
50cc heavily ported Doppler cylinder
Ninja g3 pipe
ER3 Variator
Doppler Clutch pulley
Ducati CDI
19mm Dellorto on a 4 petal reed block
Powdercoated frame and wheels.
There's really nothing on this bike that is stock.
http://i3.photobucket.com ...

ok, so this is a super old thread, but I thought I'd bump with some results. I sold the bike to a kid right after making that post. He took the shroud off and ran it for a couple of years. It stopped running because the exposed wiring got corroded. I cleaned up the wiring and ran it today and it ...

So I pulled this out of a dumpster 5 or 6 years ago and after a little tinkering I got it running. I sold it to a guy on craigslist for 300 bucks or so. A year or so went by and I was at a party, and he came rolling up on it. I was a little surprised it was still on the road, but he let me ride it ...

Have you guys seen this?
http://www.youtube.com/watch?v=ACOvWR5dKvI&search=vespa

Pretty lame, but still.

Huh? Sometimes I really can understand you myspree...

Did you mean: Like a plate of cheetos.

If so, what the * does that mean? If not, what were you trying to say?

Ok, but what the * does it look like?

Oh really, no restritor plate on Aero 50s? I was looking at the manual but I couldn't see anything that looked like a restritor plate. The write up in the document section applies to Aero 50s and Elites. Maybe some aeros have them and some don't? Is 35mph all I'm gonna get without buying gofast ...

Sweet, I'm going to the moab scooter rally and I need all the MPH I can get. None of my bigger bikes are running at the moment, so I'm going to have to take the Aero and ride at the back of the pack, WAAAAAY back.

Does anyone have a picture or two of the Variator, pully, and the restrictor plate? I ...

I have a few qustions about the removal of the restrictor plate on my aero 50. In the document in the performance section it says to remove the pully with an impact gun. How do I install it again? Using the impact gun? How do I tell how much I am torquing it when I put it back on? Also, if someone ...

Nah, I really don't think it will. I'll just make sure everything is in good shape and I'll run a cooler plug.