Honda Spree and Elite 50 Forums

I have the full vin from the from the frame and the plate which match. They verified those are correct. I gave the full engine number. Of which they say is nowhere near their records. Meaning they don't have a real engine number on their record. I have spoken with half a dozen different people and ...

So a quick background the state of Minnesota will not release my title as the engine number I had provided did not match for my 83 nh80 aero. I was able to confirm that the number on their record did not have the hf01e prefix that is standard on this model. According to then what I gave and they had ...

I will second what johnniespeed says...In my 46 years of legal vehicular ownership of motorbikes, the engine number has never, ever, ever meant anything to the BMV...ONLY the frame or chassis VIN... :urban: ...fwiw

Thanks! Still digging into the issue. They said they are now researching. But ...

I tried to register my scooter title in minnesota for my 83 nh80. After two years I never recieved it and I have since moved out of state to Illinois. I finally got a hold of someone at the state. They told me that my vin does not match my engine number. I never changed the engine or the crankcase ...

I have seen some posts about modding the original sealed headlight assembly. Which I may need to do. I was hoping that someone may know of a headlight from another scooter which may be compatabile? OEMs are hard to find, and when I do they are pricey.

thanks, some jostling around made a difference. I think I just need to go back in and be more mindful of placement.

I have an 83 nh80 with a ct intake and oko carb. I was off about the length. I did have a few inches. I finally got the cable installed. The problem is now if I turn the handle bars right it revs the throttle. Does that seem like a short throttle issue?

I have purchased a new throttle cable. I connected the cable to the throttle end. I go to the carb end. I only have an inch of exposed cable left. I have all the joints tightened. What am I doing wrong?

Thank you so much! I was racking my brain around the single intake. Not too much brain obviously. Now yet another step. Off to find a hobby shop and someone who can tap that intake for me. Any particular spot on the intake necessary?

I have installed a ct intake with a 24mm oko carb. Due to work travel its not quite finished. Before I hooked up the lines I was wondering if anyone had pics of a similar if not same setup so I can use it as a visual reference. Any help is greatly appreciated.

Thanks!