Honda Spree and Elite 50 Forums

Update:
I installed my 3rd starter motor and it now works. The 2 previous starters that I put on and burned out must have been bad.

Update:
I cut the wires and bought a new harnass. This did not solve the clicking noise. So, I replaced the starter with an old one I had in a parts box. I checked the starter on the table before I installed it, and it worked fine. I put the starter on the motor and hooked things up. I used the ...

I was able to remove the top stud and replace it with one that doesn't have the thicker middle. It is now attached. I have a new battery and the charger says it is fully charged. I did notice that the female end of the 6 pin wiring harness by the battery has some loose and corroded wires. Could this ...

I bought a 94 Elite with an aftermarket exhaust which was leaking, even though the previous owner put some type of red stuff on it to try to seal it. I figured I would go back to a stock muffler and it would be easy enought to install. On the cylinder head, the top bolt stud is thicker at the base ...

I am looking for plastics for my 1994 Honda Elite SA50. All of them, or I will take what I can get. The guy I bought this from used plastic zip ties to hold everything together. I would like to have the black. If you don't have them, do you know where I can get the plastics? I also need an key ...